Sno-Kone

#1050 Strawberry #1051 Cherry #1052 Grape #1053 Orange #1054 Lime #1055 Blue Raspberry #1057 Bubble Gum #1058 Root Beer

Home Page

1. Place drain pan in location where use is planned making sure
   draining water wont drain in a location that would create a
   mess.
   
2. Place unit on drain pan and inspect unit making sure machine
   is empty and switches are off.
   
3. Plug unit into a properly grounded receptacle making sure the
   power cord will not create a tripping hazard.
   
4. When ready to make sno-kones turn on motor, and add ice,
   filling tube to about one inch from the top.  Push down feeding
   handle to push ice against the cutter head.  Do not use too
   much pressure when pushing down.  If motor sounds strained
   release and reapply pressure to allow ice to be cut.
   
5. After enough ice has been cut, scoop ice into a cone and add
   desired flavoring syrup.